Steel wire cable tray has proven a sturdy contender to conventional sheet metal cable tray.

The success of mesh tray is largely down to its versatility, simplicity and cost effective installation making mesh tray a great choose for any project large or small.

PG/GS: Continuous galvanisation before manufacture

using the Sendzimir process EN 10244-2: PG standard (wire) EN 10327: GS standard (accessories) Before manufacture, a coating of zinc is deposited by continuous immersion on the steel sheets or wires. The appearance of the components is now smooth and grey.

Electrogalvanising after manufacture EN 12329 standard

The cable tray, manufactured using untreated steel wire, is pickled and then immersed in an electrolyte containing zinc. Zinc is then deposited on it by passing an electric current. A smooth bluish-grey, fairly glossy appearance is obtained to a greater or lesser extent depending on the pH value of the electrolytic bath used.

The colour and level of gloss have no negative or positive effect on the corrosion resistance of the coating.

Hot dipped galvanised after manufacture EN ISO 14 61 standard

The cable trays or accessories, manufactured from untreated steel sheetor wire, are degreased and pickled before being immersed in a bath of moltenzinc. The entire product is therefore covered with a thick layer of zinc. Alight grey, slightly rough appearance is obtained.

NOTE: Any white marks due to the formation of zinc hydroxycarbonate which might appear on the surface have no influence on the corrosion resistance. This  is in fact the very principle on which galvanic protection is based.

Geomet is a treatment based on zinc and aluminium. As it does not contain any chromium VI (hexavalent), it complies with the RoHS Directive. Offering protection equivalent to GC, it is used for small accessories and fixings which are difficult to hot dip galvanise.

Stainless steel 304 L EN 10088-2 standard AISI 304L - X2CrNi18.09 -1.4307 Offers good corrosion resistance against soft water, normal environments and food products (except mustard and white wine)

Stainless steel 316 L EN 10088-2 standard AISI 316L - X2CrNiMo17.12.2- 1.4404

Since it contains molybdenum, stainless steel 316L is able to resistintergranular corrosion. This makes it paricularly suitable for the chemical and food industries, the nitrates explosives industry and environments containing halogen (fluorine and chlorine)

30mm Wall Height	54mm Wall Height
80mm Wall Height	105mm Wall Height
150mm Wall Height